Your Trusted Source for Decorative Concrete Mixes in Ohio

At BonTon Supply, we’re passionate about decorative concrete. We believe it has the power to transform ordinary spaces into stunning works of art. That’s why we’re dedicated to providing Ohio tradesmen and contractors with the highest quality decorative concrete products and expert guidance to bring their visions to life.

Have a custom project? Get a Quote >

Pro Release Liquid Release Agent for Stamping Overlays Without Residue

Release agent is a two dollar decision that shows up in the finished color of a five thousand dollar patio. It is worth understanding before the stamps come off the truck.

What a Release Agent Is Preventing

Fresh overlay material wants to grab anything pressed into it. A stamp mat lifted off an unreleased surface pulls material with it, which tears the pattern and forces the crew to retool a section that was already correct.

The release agent creates a lubricating barrier between the tool and the material. Pro Release is a colorless liquid formulated for exactly that, keeping stamps, texture skins, stencils, and tools from sticking to freshly placed concrete or overlay surfaces.

Ultra low viscosity is the property that matters in application. It sprays easily, which means it covers a mat evenly rather than pooling in the low points of a texture.

Liquid or Powder

Both categories work. They produce different results and different problems.

Powder release is pigmented and doubles as a coloring step, depositing antique color into the texture as it releases. That is useful when the antiquing is meant to happen at stamping. It is also permanent in the sense that the color goes where the powder goes, and it leaves material on the surface that has to be washed off before sealing.

Liquid release is colorless. It does the release job and nothing else, which keeps the coloring decision separate and reversible. On a job where color is being applied and antiqued deliberately after the fact, that separation is worth having.

Pro Release evaporates without leaving residue, which is the practical advantage. There is no wash down phase, no residue trapped under the sealer, and no color surprise when the surface dries.

Where Residue Causes Problems

Sealer failure and release residue are related more often than crews expect.

A sealer bonds to the surface it is applied over. Residue sitting on that surface becomes the thing the sealer bonds to, which produces peeling, cloudiness, and blotching that get blamed on the sealer. ACI 302.1R discusses finishing and associated materials for concrete floor and slab work, and a preview is published by the American Concrete Institute.

A release agent that evaporates cleanly removes that variable. It also shortens the job, since the surface moves from stamping to coloring without a cleanup phase in between.

Vertical Work Uses It Too

Release is usually discussed as a horizontal stamping product, but vertical work uses it just as heavily.

Texture skins pressed into Wall Mix on a fireplace surround or a chimney chase stick exactly the way they do on a slab. So do carving tools working a stone joint. Our page on vertical overlay applications covers that work.

The advantage on vertical surfaces is larger, because a torn texture on a wall is at eye level and a torn texture on a patio is under furniture.

Where It Fits in the Sequence

Release goes on after the overlay is placed and before the tool touches it.

Stamp Mix is formulated with working time for detailed stamping and carving, which is what makes an even release application possible rather than rushed. Our page on resurfacing a patio with a stampable overlay covers the material side.

Color follows stamping. The Liquid Color Pack provides water based natural pigment blends that mix with Pro Seal for base coloring, accent coloring, and antiquing.

Sealing closes the job, and our guide to sealer selection covers how to choose one.

Why Ohio Contractors Buy Release From BonTon Supply

BonTon Supply distributes the Stone Edge line to Ohio contractors and tradesmen, and the staff stamped these products on real jobs for over a decade before becoming a distributor. Release agent is the item most likely to be forgotten on an order and the one that stops a stamping day cold when it is missing. There are no minimum order quantities.

If you are looking at a stamping day and deciding between liquid and powder release, the question is whether you want the color decision made at stamping or afterward. The BonTon Supply team can talk through the sequence and get the material on the truck with the rest of the order. Contact us to talk through the job.